Skip to main content
Affordable High Quality EDM Machines Made for Europe logoAffordable High Quality EDM Machines Made for Europe logo

WHICH ELECTRODE TO CHOSE – GRAPHITE OR COPPER?

When it comes time to decide whether to use graphite or copper electrodes in your shop, it’s important to look at the big picture. One has to consider application for which EDM is going to be used, depending on which a type of electrode can be chosen.
Earlier, Copper was the only option available, however with more availability of Graphite and its grades, use of Graphite for electrodes has increased substantially in last few years.

Advantages of graphite electrodes

Graphite comes with lot of advantages. Sold by the grade, machining graphite is very easy. It can be cut, drilled, grind, to whatever size and shape we need. Graphite can drill cut up to three times faster than copper and provides excellent surface finishes.

Another huge advantage of graphite is no burrs are produced in its machining. The graphite material can be machined on a high-speed mill and its easier to cut out complex shapes and forms. Most importantly, once the material is cut, no post processing is required.
Graphite has very high melting point which results in less wear. Moulds could be cut with one or two electrodes on a CNC EDM machine with very little wear.

Disadvantages of graphite electrodes

If your EDM is old than you might at times find graphite dust particle on the floor or near by machines. However, the newer high speed machines do not face this problem. Another important point is the finish on the graphite should be as good as you need in the mould. If there are to many wear marks on graphite than they tend to get reproduced on the mould.

Advantages of copper electrodes in EDM Machining

The biggest advantage of copper is mirror like surface finish. However, this requires the copper to be machined using CNC Machine with the right setting and perfect flushing techniques. This is especially useful in smaller cavities or the one with complex geometrical shapes that are relatively difficult to polish.
Also, Copper tends to work better for EDM machining even if the flushing system is poor. If an eroded part is not flushed it may be possible to get a non-pulsating, direct flow of current from the electrode to the work piece, With copper electrodes such instances are arrested.

Disadvantages of copper electrodes

Copper is a hard metal, as compared to graphite. Copper also has very low heating point. With quick heating copper electrodes develop a tendency to stick or melt. Another disadvantage, as compared to graphite electrodes is creation of burr. No matter what precautions you take, copper electrodes in most instances will need to undergo a deburring process.

Conclusion

Copper and graphite electrodes come with their own set of advantages and limitations. The decision to choose the right kind of electrode must be taken only after a careful consideration of speed and finishing requirements to machine the material safely.

Using Copper or Graphite Electrodes: Look at the Big Picture

Using Copper or Graphite Electrodes?

Look at the Big Picture

Since graphite and copper provide approximately the same surface finish, one must consider the shop - floor environment - and examine the advantages and disadvantages before choosing a material.

When it comes time to decide whether to use graphite or copper electrodes in your shop, it's important to look at the big picture.  To say which electrode works best is very difficult, it is totally applications-driven. So much depends on what you have to work with on your shop floor in the way of support equipment. Both copper and graphite provide approximately the same end result. The difference is time to EDM the work and electrode manufacturing time and cost.

Choosing an electrode material is often a result of where you were born and what type of EDM equipment you use. "For example, graphite was basically developed in the United States back in the early 1960s, so the American EDM equipment manufacturers in those days concentrated on the graphite circuitry when designing their equipment, whereas, since the European and Asian EDM equipment manufacturers didn't have access to graphite, they developed copper circuitry.

If you have newer equipment built after 1990, the electrode material of choice in North America is graphite. This is used in 90 percent of the applications. In Europe and Asia, graphite is becoming more popular as an electrode material because of availability, machinability and speed of cutting.

Graphite

Advantages and Benefits
Sold by grades, graphite cuts approximately three times faster than copper. What makes a good grade or a poor grade is particle sizes. Particle size gives you strength, machinability and greatly influences the metal removal rate, wear and the surface finish. Graphite is made up of carbon particles that are put through a graphitizing process to produce graphite. The smaller the particle size is, the better the graphite. Graphite can be purchased in big blocks, and then cut up to be machined; or it can be ordered precut or ground into the size you require.

"Graphite machines very easily - you can mill it, grind it, turn it, drill it, tap it, even file it to whatever shape you want.  Another advantage of graphite is that it doesn't burr. You can put it on a duplicating machine or a graphite high-speed mill and cut out complex shapes and forms, and once it's cut you are finished - with no deburring.

Additionally, graphite's high melting temperature results in less wear than other electrode materials, so a mold could be cut with one or two electrodes on a CNC EDM machine with very little wear. A CNC die sinker may need a third or forth electrode to finish the mold,  It depends on the age of the EDM machines.

Limitations
If your shop has older fabricating equipment, machining graphite electrodes will result in dust particles on the shop floor and in the nearby machines. However, the new high-speed mills that are sold today are specially designed to machine graphite. They are totally enclosed and have a vacuum system to remove all of the dust.

Copper

Advantages and Benefits
Copper can be cut on wire EDM machines, but there are only certain graphites that can be cut on a wire machine - the particle size should be five microns or less. Copper also is a little more forgiving in a poor flush situation than graphite. In EDM, if the flush doesn't remove the eroded particles or chips out of the cutting area, there's something that can occur where you get a non-pulsating, direct flow of current from the electrode to the workpiece. The result of this is a pit in the workpiece. Copper is more forgiving in those applications - all metallic electrodes are - they won't arc out as fast. But some of the newer EDM power supplies have adaptive logic or fuzzy logic, which eliminates the problem altogether. Copper - when used at specific settings with the correct flushing techniques using a CNC machine or a machine with an orbiting system - can produce a mirror-like surface finish. This is useful in small cavities where it is difficult to polish.

When you add tungsten to copper (copper tungsten), the result is an electrode material that has extremely good wear characteristics but is very difficult to machine. When EDM'ing carbide, this is the best metallic electrode material to use. The best graphite material would be copper graphite, which is graphite impregnated with copper.

Limitations
Copper is more difficult to machine and when you mill it, it has the tendency to stick to the cutter. When you grind it, it can clog up the grinding wheel - it heats up quickly and has a tendency to grab the grinding wheel. You'll have burrs no matter how you machine it, so you have to deburr it. Size and weight also can be an issue. A 300 x 150 x 70 piece of copper weighs 40kg, whereas a piece of graphite the same size is 5 kg.

The bottom line is use what you think will work best in your shop with the equipment that you have available. If some electrodes are beyond your machining ability, have someone make them for you. You have to base it on your own experience and the resources you have available. Ask for suggestions from the equipment manufacturer or from your electrode material supplier. Regardless of what electrode material or combination of materials you decide on, be sure that you know the speeds and feeds to machine the material safely. When in doubt, ask.